Ever found yourself stranded because your Subaru key fob suddenly stopped working? Frustrating, right? Don’t worry, you’re not alone. Many Subaru owners face this issue when the battery in their key fob dies. But what if you could easily replace it yourself and avoid the hassle of going to the dealership? That’s where this article comes in to save the day!
Imagine the convenience of being able to swap out the battery in your Subaru key fob within minutes, without any special tools or expertise. No more last-minute trips to the car shop or waiting around for assistance. By following simple steps and tips provided here, you’ll be back on the road with a fully functional key fob in no time. Stay tuned to discover how you can take control of this common problem and keep your Subaru key working smoothly.
Gather Necessary Tools
To replace the battery in your Subaru key, you’ll need a few basic tools easily found at home:
- Flathead screwdriver: Used to open the key fob without causing damage.
- Replacement battery: Ensure it’s the correct size and type for your Subaru model.
- Small tray or container: Handy for keeping track of small screws and components.
- Clean cloth: Useful for wiping down the key fob before reassembly.
- Steady work surface: Choose a well-lit area with ample space to prevent any small parts from getting lost.
Following these simple steps and tips will make the battery replacement process smooth and hassle-free.
Identify Correct Battery Type
When identifying the correct replacement battery for your Subaru key fob, start by looking at the existing battery. The battery type is typically printed on the battery itself.
Some common battery types for Subaru key fobs include CR1620 and CR2032. Ensure you purchase the same type to guarantee compatibility.
If the battery is not easily accessible or you are unsure of the type, refer to your Subaru’s manual for specific battery requirements.
Remember to verify the battery type before proceeding to replace it to avoid any issues with the key fob functioning properly.
Open the Subaru Key Fob
To open the Subaru key fob, look for a small release latch on the back cover. Press this latch gently with your finger. Slide the cover downwards to remove it from the fob.
Inside, you’ll find the circuit board of the key fob. Avoid touching the circuit board to prevent static electricity damage.
Once the cover is off, locate the battery compartment. It’s usually a small, circular area on the circuit board. Carefully remove the old battery from its slot.
Replace the Battery
When it’s time to replace the battery in your Subaru key fob, follow these simple steps to ensure a smooth process:
- Step 1: Open your key fob using the small release latch on the back cover. Slide it downwards gently to access the circuit board.
- Step 2: Locate the battery compartment, usually a small circular area on the circuit board.
- Step 3: Carefully remove the old battery from its slot. Avoid touching the circuit board to prevent static electricity damage.
- Step 4: Replace the old battery with a new one of the same type. Ensure it is positioned correctly in the slot.
- Step 5: Close the key fob by aligning the back cover and pressing it firmly until it clicks into place.
| Facts & Tips | Data |
|---|---|
| Battery Type | CR1620 or CR1632 |
| Battery Life | 1-2 years |
| Avoid Force | Gentle handling is key |
Now that you know how to replace the battery, you can keep your Subaru key fob working effectively.
Test the Key Fob
When you’ve replaced the battery, it’s essential to test your Subaru key fob to ensure everything’s functioning as it should.
- Check Button Responsiveness: Press the buttons to verify they’re working correctly.
- Test Remote Unlocking: Stand near your car and confirm the key fob unlocks the doors.
- Evaluate Range: Step farther away and check if the key fob can still unlock your vehicle.
- Observe Indicator Lights: Pay attention to any indicator lights that signal successful transmission.
Remember, a properly working key fob is crucial for convenient access to your Subaru.
Conclusion
That’s it! By following these simple steps, you can easily replace the battery in your Subaru key fob. Remember to test it afterwards to make sure everything is working smoothly. Having a properly functioning key fob is essential for hassle-free access to your Subaru. Happy driving!
Frequently Asked Questions
Why is it important to test my Subaru key fob after replacing the battery?
It is crucial to test your Subaru key fob after battery replacement to ensure proper functionality. This includes checking button responsiveness, testing remote unlocking near and far from the car, and observing indicator lights for successful transmission.
How can I test my Subaru key fob after replacing the battery?
You can test your Subaru key fob by checking if the buttons respond properly, testing remote unlocking from different distances, and observing indicator lights to confirm successful transmission.
Why is a properly working key fob essential for Subaru owners?
A properly working key fob is essential for Subaru owners as it provides convenient access to the vehicle, ensuring seamless entry and security.
