Ever found yourself locked out of your 2019 Jeep Cherokee because your key fob battery decided to call it quits at the worst possible moment? It’s frustrating, we know. But fret not, because in this article, we’ve got your back with a simple solution to this common yet pesky issue.
Picture this: you’re running late for an important meeting, and as you rush to your car, you realize your key fob isn’t working. Sounds familiar? We’ve all been there. But what if we told you that replacing the battery in your 2019 Jeep Cherokee key fob is easier than you think? Stay with us, and we’ll guide you through the process step by step.
Step 1: Gather the Necessary Tools
When changing the battery in your 2019 Jeep Cherokee key fob, it’s essential to have the right tools at your disposal. Here’s what you’ll need:
- New battery for your key fob
- Small flathead screwdriver or prying tool
- Patience and a steady hand
Remember, having these tools ready will make the battery replacement process smoother and more efficient.
Recommended Products
**To confirm compatibility please use the picture guide located in the product images**
Please check product image to confirm compatibility.(Opening/Pry Tool + Installation video included)
★REPLACEMENT: For keyless entry remote Car key FCC ID: GQ4-53T, Part Numbers: 68105083AC, 68105083AD, 68105083AE, 68105083AF,68105083AG, Chip ID: 4A
Step 2: Locate the Battery Compartment
To locate the battery compartment in your 2019 Jeep Cherokee key fob, turn it over and examine the back. You’ll find a small indentation or a latch that allows you to open the fob casing. Once you identify this, you’re ready to move on to the next step.
Remember, each key fob design varies, so take your time to inspect the entire fob to ensure you locate the battery compartment accurately. It’s a crucial step in the process to ensure a successful battery replacement.
Step 3: Remove the Old Battery
Now it’s time to remove the old battery from your 2019 Jeep Cherokee key fob:
- Locate the battery compartment where the battery is housed.
- Use a small flathead screwdriver or a prying tool to gently pry open the compartment.
- Carefully take out the old battery, ensuring not to damage the surrounding components.
Keep in mind that proper handling is crucial to avoid any issues during the battery replacement process.
Recommended Products
LONG-LASTING BATTERIES DESIGNED FOR DEPENDABILITY: Duracell Lithium Coin CR2032 3 Volt batteries deliver long-lasting power and performance you can count on for devices throughout the home or on-the-go, such as key fobs, remote controls, Apple AirTag️, flameless candles, wireless cameras, thermometers, toys, and more.
Extended Lifespan: Our CR 2032 battery for key fob is engineered for longevity, offering a reliable 240mAh power source for your key fob and more, ensuring your devices run longer.
Keyless entry remote fob not included: This listing is for OEM Original replacement batteries as provided by Manufacturer for (Smart Key) Remote Fobs. Bundle of Two (2) CR2032 Remote Fob Battery and Opening/Pry Tool.
Step 4: Insert the New Battery
Now that you’ve successfully removed the old battery, it’s time to insert the new one. Here’s how:
- Pay attention to the orientation of the new battery. Make sure the positive (+) and negative (-) sides are facing the correct direction.
- Carefully place the new battery into the compartment, ensuring it sits snugly in place.
- Gently press down on the battery to secure it within the key fob.
By following these steps, you’ll complete the battery replacement process for your 2019 Jeep Cherokee key fob.
Step 5: Test the Key Fob
Once you’ve successfully replaced the battery in your 2019 Jeep Cherokee’s key fob, it’s crucial to test if everything is working properly. Here’s how you can do that:
- Synchronization: Try pressing the buttons on the key fob to ensure they are responding. If they don’t work initially, you might need to re-synchronize your key fob with the vehicle.
- Distance: Test the range of your key fob by using it from various distances. Make sure it works reliably both up close and from a bit farther away.
- Doors: Check if the key fob locks and unlocks your vehicle’s doors as intended. This is a key function to ensure the proper operation of your key fob.
- Trunk Release: If your key fob has a trunk release button, give it a try to see if it opens and closes the trunk efficiently.
- Security Alarm: Test the security alarm function by activating it using your key fob. Make sure it’s functioning correctly by listening for the alarm.
By testing these key functions after replacing the battery, you can ensure that your key fob is in good working condition.
Conclusion
That’s it! By following these simple steps, you’ve successfully replaced the battery in your 2019 Jeep Cherokee key fob. Remember to test all the key functions to ensure everything is working properly. Now you can enjoy the convenience of your key fob without any issues. Happy driving!
Frequently Asked Questions
1. Why is it important to replace the key fob battery for a 2019 Jeep Cherokee?
It’s crucial to replace the key fob battery to ensure smooth functioning of the key fob. A weak battery can lead to malfunctions like unresponsive buttons or poor range.
2. What tools do I need to replace the key fob battery for a 2019 Jeep Cherokee?
You’ll need a small screwdriver and a replacement battery, usually a CR2032 coin cell battery.
3. How do I insert the new battery correctly?
Open the key fob using a small screwdriver, remove the old battery, and place the new one with the correct side facing up.
4. Why is it necessary to test the key fob after replacing the battery?
Testing ensures all functions like button responsiveness, range, door locking, trunk release, and security alarm are working correctly.
5. How can I verify if the key fob is in good working condition post-battery replacement?
Check that the buttons respond, the range is adequate, the doors lock and unlock properly, the trunk opens, and the security alarm activates.
