Ever found yourself locked out of your car because of a dead key fob battery? Frustrating, right? Don’t worry, we’ve got your back! In this article, we’ll guide you through the simple steps to change the battery in your 2020 Ford Explorer key fob.
Imagine being in a rush, only to realize your key fob isn’t working. It’s a common scenario that many of us have faced. But fear not, with our easy-to-follow instructions, you’ll be back on the road in no time.
Locate the Battery Compartment
To replace the battery in your 2020 Ford Explorer key fob, the first step is finding the battery compartment:
- Look for a small slot at the back of the key fob.
- Slide a coin or a flathead screwdriver into the slot gently.
- Twist the coin or screwdriver to open the key fob.
By following these simple steps, you’ll easily locate the battery compartment and be one step closer to resolving the issue with your key fob.
Remove the Old Battery
When it comes to changing the battery in your 2020 Ford Explorer key fob, removing the old battery is the essential first step in the process. Here’s how you can do it:
- Locate the battery compartment on your key fob. It’s usually at the back of the key fob, where you opened it to access the battery.
- Open the key fob using the slot or opening you used to locate the battery compartment.
- Carefully remove the old battery. It should come out easily once you have access to it.
- Dispose of the old battery properly. Make sure to follow your local regulations for battery disposal.
- Clean the battery compartment if needed to ensure a good connection with the new battery.
By following these simple steps, you can remove the old battery from your Ford Explorer key fob with ease.
Insert the New Battery
In this step, you’ll Insert the New Battery into your 2020 Ford Explorer key fob. Follow these straightforward instructions to complete the battery replacement process successfully:
- Select the correct battery: Ensure you have the appropriate replacement battery for your key fob. This will typically be a CR2032 coin cell battery.
- Position the battery: Place the new battery into the compartment with the positive side facing downwards.
- Close the battery compartment: Once the new battery is correctly inserted, close the compartment securely to ensure it stays in place.
- Test the key fob: After inserting the new battery, test your key fob to check if it’s working properly. Press the buttons to verify that the key fob functions as expected.
Remember, replacing the battery in your Ford Explorer key fob is a simple process that can be done quickly and easily at home. By following these steps, you’ll have your key fob up and running again in no time.
Recommended Products
Easy Key Battery Installation – This kit includes CR2032 coin batteries for effortless installation in Ford key fobs.
**Please confirm compatibility using the fitment guide located in the product images** This battery will not fit your fob unless it matches one of the examples provided.
LONG-LASTING BATTERIES DESIGNED FOR DEPENDABILITY: Duracell Lithium Coin CR2032 3 Volt batteries deliver long-lasting power and performance you can count on for devices throughout the home or on-the-go, such as key fobs, remote controls, Apple AirTag️, flameless candles, wireless cameras, thermometers, glucose monitors, toys, and more.
Test the Key Fob
When you’ve replaced the battery in your 2020 Ford Explorer key fob, it’s time to make sure everything is working as it should. Here’s how you can test the key fob:
- Stand Close: Be near your car when testing.
- Lock & Unlock: Try locking and unlocking your vehicle.
- Alarm & Trunk: Test the alarm and trunk release buttons.
- Distance Test: Check the range by using the key fob from different distances.
Recommended Products
HIGH-QUALITY: Every Single Keyless Entry Remote Start Control Car Key Fob is Fully Pre-tested by Professional Locksmith Tools before Shipping. All Our Key Fobs are Pre-installed with Battery and Electronics
COMPATIBLE WITH FCC ID: M3N-A2C93142600/ M3N-A2C931426. For Full Compatible List, Please Carefully Check FCC ID, Part Number, Frequency and Vehicle Fitment Tool below. This Key Fob Replacement Is Compatible with Ford Explorer 2018-2022 Expedition 2018-2022 Edge 2017-2022 Escape 2020-2022 Lincoln Navigator 2020-2022 Aviator2020-2022 Corsair 2020-2021
FCC ID: M3NA2C931426, Frequency: 902MHz, Buttons: 5 Button
Additional Tips for Key Fob Maintenance
- Avoid Extreme Temperatures: Intense heat or cold can affect your key fob’s performance, so try not to leave it in direct sunlight or extreme cold for extended periods.
- Regular Cleaning: Keep your key fob clean by wiping it with a soft, damp cloth to prevent dirt and debris from affecting the buttons or electronic components.
- Battery Monitoring: Check your key fob periodically to ensure the battery is functioning properly. If you notice decreased range or button response, it might be time to replace the battery.
| Fact | Data |
|---|---|
| Battery Type | CR2032 |
| Battery Life | 1-2 years |
| Range Testing | 10-50 feet |
Remember, these maintenance tips can help prolong the life of your key fob and ensure its reliable performance when you need it most.
Conclusion
Maintaining your 2020 Ford Explorer key fob is essential for its longevity and performance. By following the simple steps outlined in this guide, you can easily replace the battery and keep your key fob in top condition. Remember to take care of your key fob by avoiding extreme temperatures, regular cleaning, and monitoring the battery regularly. These small actions can make a big difference in ensuring that your key fob operates smoothly when you need it most. With proper maintenance, your key fob will continue to serve you well for years to come.
Frequently Asked Questions
1. What type of battery does a 2020 Ford Explorer key fob use?
The 2020 Ford Explorer key fob uses a CR2032 battery.
2. How often should I replace the key fob battery?
The key fob battery should be replaced every 1-2 years for optimal performance.
3. What maintenance tips are recommended for the key fob?
Avoid extreme temperatures, regularly clean with a damp cloth, and monitor battery performance.
4. What is the range testing capability of the key fob?
The key fob has a range testing capability of 10-50 feet.
5. How can I ensure reliable key fob performance?
Follow maintenance tips to extend the key fob’s lifespan and ensure reliable performance.
