Ever found yourself locked out of your car because of a dead key fob battery? Frustrating, right? Well, worry not, as we’ve got your back! In this article, we’ll walk you through the simple steps to change the battery in your 2020 Kia Telluride key fob.
Imagine being in a rush, only to realize your key fob isn’t working. It’s a scenario many of us have faced. But with a quick battery change, you can avoid this inconvenience and get back on the road in no time.
Locate the Battery Compartment
When changing the battery in your 2020 Kia Telluride key fob, the first step is to find the battery compartment. Here are the steps to locate it:
- Check the Key Fob: Inspect your key fob to identify the specific location of the battery compartment. It may vary depending on the model of your key fob.
- Look for a Small Slot: Most key fobs have a small slot where you can insert a coin or flathead screwdriver to pry open the case. This slot is usually located along the seam of the key fob.
- Inspect the Entire Fob: In some cases, the battery compartment might be found under a cover on the back of the key fob. Check the entire fob for any indications of a compartment lid or cover.
Finding the battery compartment is the first step towards replacing the battery in your Kia Telluride key fob. It is crucial to locate it correctly to proceed with the battery replacement process smoothly.
Open the Key Fob
When opening the key fob of your 2020 Kia Telluride, you want to do so carefully to avoid damaging it. Here are the steps to get inside:
- Locate the seam: Examine the fob for a visible separation where the two halves meet.
- Use a tool: Insert a thin tool like a coin or a flathead screwdriver into the seam.
- Gently twist: Apply slight pressure to twist and pop open the fob.
Remember, being gentle is key; you don’t want to break any clips holding it together.
Recommended Products
Vehicle Compatibility Verification: Please confirm your vehicle's Year, Make, and Model match this listing before purchasing to ensure proper fitment. This can be found on your insurance card, vehicle registration, owner's manual, driver-side door jam, or vehicle title records
[Quality assured]: The car key case is made of high-quality soft TPU material,three-layer chrome plating process,scratch-resistant,and you don't have to worry about fading. Installation is as easy as installing a phone case.
Compatible Vehicles: Part Number: 95440-S9000 FCC ID: TQ8-FOB-4F24. Replacement for 2020 - 2020 Kia. For full complete list, please check our product description
Remove the Old Battery
When it comes to changing the battery in your 2020 Kia Telluride key fob, the first step is to safely remove the old battery. Here’s how you can do it:
- Locate the battery: Open the key fob following the instructions provided earlier and identify the location of the old battery.
- Remove the old battery: Use a small tool like a flathead screwdriver or a coin to carefully pry out the old battery from its compartment.
- Dispose of the old battery properly: Once you have removed the old battery, make sure to dispose of it in accordance with your local regulations for battery recycling.
- Prepare for the new battery: Before inserting the new battery, ensure that it is the correct type and size recommended for your Kia Telluride key fob.
Remember, taking your time and being gentle during this process is key to avoiding any damage to the key fob.
| Facts/Steps | Details |
|---|---|
| Locate old battery | Open key fob and find the current battery. |
| Remove old battery | Use a tool to carefully take out the old battery. |
| Dispose old battery | Follow local regulations for battery disposal. |
| Prepare for new battery | Ensure the new battery is the correct type for your key fob. |
Recommended Products
Extended Lifespan: Our CR 2032 battery for key fob is engineered for longevity, offering a reliable 240mAh power source for your key fob and more, ensuring your devices run longer.
Premium Batteries Elite Series Replacement compatible with Nissan smart key fobs, including: Sportage, Sorento (2003-2022 only), Soul, Forte, Optima, K5, Rio (2005-24), Sedona, Niro, Seltos, Cadenza, Carnival, Stinger, EV6, Telluride (2020-2021 only), Spectra (2002-2009), Rondo, Amanti, Borrego, Soul EV, Niro EV, K7 K900
**Please confirm compatibility using the fitment guide located in the product images**
Insert the New Battery
When it’s time to insert the new battery into your 2020 Kia Telluride key fob, follow these simple steps:
- Step 1: Take the correct new battery (typically a CR2032) out of its packaging.
- Step 2: Position the battery correctly in the compartment. The positive side should face down.
- Step 3: Gently press the battery into place until it’s secure.
- Step 4: Check that the battery is properly installed and the compartment is closed.
Remember, making sure the battery is inserted correctly is crucial for the smooth functioning of your key fob.
Recommended Products
LONG-LASTING BATTERIES DESIGNED FOR DEPENDABILITY: Duracell Lithium Coin CR2032 3 Volt batteries deliver long-lasting power and performance you can count on for devices throughout the home or on-the-go, such as key fobs, remote controls, Apple AirTag️, flameless candles, wireless cameras, thermometers, toys, and more.
Elite by SHI USA Batteries Replacement compatible with 2001-2022 Hyundai smart key fobs, including: ✔ Elantra ✔ Sonata ✔ Tucson ✔ Santa Fe ✔ Accent ✔ Kona ✔ Palisade ✔ Elite Batteries compatible with Veloster ✔ Venue ✔ Ioniq ✔ Azera ✔ Nexo. May be compatible with some 2023-2026 models — check your owner's manual.
LONG-LASTING BATTERIES DESIGNED FOR DEPENDABILITY: Duracell Lithium Coin CR2032 3 Volt batteries deliver long-lasting power and performance you can count on for devices throughout the home or on-the-go, such as key fobs, remote controls, Apple AirTag️, flameless candles, wireless cameras, thermometers, glucose monitors, toys, and more.
Test the Key Fob
After replacing the battery in your 2020 Kia Telluride key fob, it’s crucial to test if everything is working correctly. Here’s what you need to do:
- Check Functionality: Ensure the key fob responds when you press the buttons.
- Testing Range: Try using the key fob at various distances to confirm its range.
If you encounter any issues after testing, double-check the battery’s placement and try the steps again. Remember, proper battery installation is key to the functionality of your key fob.
Conclusion
That’s it! You now know how to change the battery in your 2020 Kia Telluride key fob. Remember to test the key fob after replacing the battery to ensure it’s working properly. If you encounter any issues, double-check the battery placement. Proper installation is key to keeping your key fob functioning smoothly. Enjoy using your refreshed key fob!
Frequently Asked Questions
How do I correctly insert a new battery into my 2020 Kia Telluride key fob?
To insert a new battery into your 2020 Kia Telluride key fob, locate the battery compartment and carefully place the battery with the correct polarity. Ensure proper alignment and close the compartment securely.
How can I test if the new battery in my key fob is working correctly?
After inserting the new battery, test the key fob’s functionality by pressing the buttons to check for responsive actions. Also, test the key fob’s range at various distances to ensure proper signal transmission.
What should I do if my key fob is not working after replacing the battery?
If your key fob is not functioning correctly after replacing the battery, double-check the battery placement to ensure it is correctly inserted with the right polarity. Proper installation is essential for the key fob’s functionality.
