Ever found yourself locked out of your car because of a dead key fob battery? Frustrating, right? But fret not, as we’ve got your back! In this article, we’ll guide you through the simple steps to change the battery in your Subaru key fob.
Imagine being in a rush, only to realize your key fob isn’t working. Sounds like a nightmare? We understand the struggle. That’s why we’re here to show you how a quick battery swap can save you from such sticky situations.
Step 1: Gather the Necessary Tools
To begin with, it’s essential to gather the tools required for changing the battery in your Subaru key fob. Here’s what you’ll need:
- New CR2032 battery
- Small flathead screwdriver or a coin
- Paper towel or cloth to keep your hands clean
Now that you have all the necessary tools, you’re ready to move on to the next steps.
Step 2: Locate the Battery Compartment
In this step, you’ll need to find the battery compartment on your Subaru key fob. Here’s how to do it:
- Inspect the Key Fob:
- Turn the key fob over to locate the seam along the edge.
- Some key fobs may have a small indentation or a slot indicating where the compartment is.
- Use Visual Cues:
- Look for any icons or markings that signify the location of the battery compartment.
- On some models, it might be marked with a picture of a battery.
- Check the Manual:
- If you’re having trouble locating the compartment, refer to the Subaru key fob manual.
- The manual usually includes diagrams and specific instructions tailored to your key fob model.
- Avoid Applying Excessive Force:
- Be gentle when trying to open the battery compartment to prevent damage to the key fob.
- Using excessive force can break the key fob casing or the compartment’s cover.
Click here to preview your posts with PRO themes ››
Remember to handle the key fob carefully while locating the battery compartment. Once you’ve found it, you’re ready to proceed to the next step.
Step 3: Remove the Old Battery
It’s time to remove the old battery from your Subaru key fob. Here’s how you can do it:
- Locate the battery: Look for the battery compartment inside your key fob. It is usually secured with screws or clips.
- Use a screwdriver or a flat tool: Carefully unscrew the compartment or use a flat tool to open the clips, ensuring not to damage the surrounding components.
- Take out the old battery: Gently remove the old battery from its place, noting its position and orientation for when you insert the new battery.
Remember, handling the battery with care is crucial to prevent any damage to your key fob.
Step 4: Insert the New Battery
Reaching this stage means you’re closer to reviving your Subaru key fob. Now, it’s time to insert the new battery to give your key fob a fresh start.
Follow these simple steps:
- Position the new battery: Ensure it aligns correctly with the contacts in the battery compartment.
- Press gently: Push the battery down until it’s securely in place.
- Double-check the orientation: Make sure the positive (+) and negative (-) sides are facing the right way.
- Test the connection: Give the key fob a press to verify that the new battery works.
Remember, accuracy is key to success when handling electronic devices like your Subaru key fob.
Step 5: Test the Key Fob
After replacing the battery in your Subaru key fob, it’s time to make sure everything is working as it should. Here’s how you can test the key fob efficiently:
- Press Buttons: Start by pressing the buttons on your key fob to check if they are responding properly.
- Check Range: Test the range by trying to unlock or lock your car from different distances to ensure the signal is strong.
- Listen for Confirmation: Listen for the sound of your car locking or unlocking as you press the buttons on the key fob.
- Inspect LED Light: If your key fob has an LED light, observe if it blinks when you press the buttons.
- Replace Cover: Once you’ve confirmed that the key fob is working correctly, securely snap the cover back into place.
Click here to preview your posts with PRO themes ››
| Key Fob Testing Checklist |
|---|
| Press all buttons |
| Check signal range |
| Listen for sound confirmation |
| Observe LED light |
| Securely replace cover |
Remember, proper testing ensures that your Subaru key fob is functioning well after battery replacement.
Conclusion
You’ve now successfully learned how to change the battery in your Subaru key fob. By following the steps outlined in this guide, you can ensure that your key fob continues to operate smoothly. Remember to test the key fob after replacing the battery to confirm proper functionality. With a little effort and attention to detail, you can easily maintain your Subaru key fob and avoid any potential issues in the future. Keep your key fob in top condition by regularly checking and replacing the battery as needed. Thank you for reading, and happy key fob maintenance!
Frequently Asked Questions
What is the fifth step in changing the battery of a Subaru key fob?
After replacing the battery, the fifth step involves testing the key fob to ensure proper functionality.
How do I test the Subaru key fob after changing the battery?
To test the key fob, press the buttons, check the signal range, listen for confirmation sounds, observe the LED light, and securely replace the cover.
Why is thorough testing of the key fob important after battery replacement?
Thorough testing is crucial to guarantee the optimal performance of the Subaru key fob and ensure it operates correctly.
Click here to preview your posts with PRO themes ››
Battery industry professional with 5+ years of experience. Bachelor of Science in Electrical Engineering from Georgia Tech. Specializes in power systems and renewable energy.