Ever found yourself stranded outside your car, desperately clicking your Subaru key fob, only to realize it’s out of juice? Frustrating, right? We’ve all been there. But fret not, because in this article, I’ll show you the quick and easy steps to change the battery in your Subaru key fob.
Imagine having the power to swiftly replace your key fob battery without any hassle. No more last-minute panics or unexpected lockouts. By following the simple instructions in this guide, you’ll be back on the road in no time, with a fully functional key fob at your fingertips.
Step 1: Gather Necessary Materials
- New CR2032 battery
- Small flat-head screwdriver or coin for opening the fob
- Soft cloth or tissue to keep the fob clean
Step 2: Locate the Battery Compartment
In most Subaru key fobs, the battery compartment is typically located at the back of the fob. It’s usually secured with small screws or clips. Some models may have a simple slide-out compartment.
- Check for a small indentation or slot on the fob’s edge, indicating the opening of the compartment.
- Using your small flat-head screwdriver or coin, gently pry open the compartment. Be careful not to damage the fob or the casing.
- Once you have opened the compartment, you’ll see the CR2032 battery snugly nestled inside.
Remember, each key fob model may have slight variations in the location and method of accessing the battery compartment, so take your time and handle it gently to avoid any damage.
Step 3: Remove Old Battery
When it comes to replacing the battery in your Subaru key fob, the next crucial step is removing the old battery. Follow these straightforward steps to accomplish this task efficiently:
- Identify the Old Battery: Locate the CR2032 battery inside the compartment that you accessed in the previous step.
- Remove the Old Battery: Carefully take out the old battery from the compartment, ensuring not to damage the contacts or surrounding components.
- Dispose of the Old Battery: Safely dispose of the old battery following proper recycling guidelines. Consider taking it to a local recycling center to ensure it’s handled appropriately.
- Prepare for New Battery Installation: Before inserting the new battery, make sure the compartment is clean and free of any debris that could interfere with the connection.
- Avoid Touching New Battery Contacts: To prevent interference with battery performance, hold the new battery by the edges and avoid touching the contacts directly.
By correctly executing these steps, you’ll smoothly transition to the final part of the process: installing the new battery.
Step 4: Insert New Battery
Let’s insert the new CR2032 battery into your Subaru key fob to power it up again. Follow these simple steps to complete the battery replacement process smoothly:
- Hold the new battery with your fingers on the edges to avoid touching the contacts.
- Place the battery into the compartment with the positive side facing up.
- Ensure the battery fits snugly into the slot without any gaps.
- Gently press down on the battery to secure it in place.
Congratulations! You’ve successfully installed the new battery in your Subaru key fob. Now it’s time to test if it’s working correctly.
Step 5: Reassemble the Key Fob
Now that you have successfully replaced the battery in your Subaru key fob, it’s time to reassemble it to ensure everything functions smoothly.
- Secure the Key Fob: Place the key fob cover back over the battery compartment, ensuring it aligns properly with the key fob body.
- Press the Cover: Gently press the cover until you hear a click, indicating that it’s securely in place.
- Test the Key Fob: Press the buttons on the key fob to test if it’s working correctly. You should see a response from your vehicle, such as the lights flashing or the doors locking.
- Final Check: Double-check that the key fob cover is firmly attached and that there are no gaps or loose parts.
Conclusion
That’s it! By following these simple steps, you can easily change the battery in your Subaru key fob and ensure it functions smoothly. Remember to reassemble the key fob correctly, test its functionality, and double-check for any loose parts. Taking these precautions will help maintain the effectiveness of your key fob and keep it working efficiently. Happy driving with your properly functioning key fob!
Frequently Asked Questions
How do I reassemble my Subaru key fob after replacing the battery?
To reassemble your Subaru key fob after replacing the battery, make sure to secure the cover back over the battery compartment. Ensure proper alignment and press it gently until you hear a click indicating it’s securely in place. Test the key fob by pressing its buttons to confirm proper functionality. Look for expected responses like flashing lights or locked doors. Finally, perform a thorough check to ensure the key fob cover is firmly attached without any gaps or loose parts. Following these steps is crucial for the key fob to work correctly after battery replacement.
